You have no items in your shopping cart.
Subtotal: $0.00
Irrigation
-
Pepco Octa Bubbler Red 10 GPH
$11.20The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets, it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.
Learn More -
Float Valve with Barbed Fitting
$26.15An essential part for do-it-yourselfers! This float valve assembly controls the water/nutrient solution level in your primary reservoir (controller). Comes with 1/2 brass barbed fitting. Learn More -
Float Valve 1/4" for STEALTH & SMALL BOY
$18.85This valve comes with a 1/4" quick connect fitting. Use this float valve to adjust water level and can be mounted horizontally or vertically. The kit allows you to fill a reservoir or tank, unattended, to your desired water level. Learn More -
Float Valve 1/2" with Barbed Fitting
$24.851/2" female pipe thread to barb adapter. Adjustable water level and can be mounted horizontally or vertically. Allows you to fill any tank or reservoir unattended - never flood your garden again! All plastic and stainless steel materials. Better than brass and fully adjustable. Learn More -
Fitting Kit With Adapter for Ebb & Flow Applications
Starting at: $7.35
The Fill/Drain Fitting Kit includes one Fill / Drain fitting (custom bulkhead fitting with 1/2" screen, nut and O-ring) and one overflow fitting (PVC tube and adapter with 1" screen). These work great individually, but work together to allow you to make a tray into an ebb/flow system. Learn More -
Figure 8 Tubing End Closers
Starting at: $3.45
Figure 8 Tubing End Closure, fits tubing O.D. up to .660" or .720" High Quality Plastic Maximum UV Protection Learn More -
EZ Clone 360 Degree Replacement Sprayer
Starting at: $2.95
The EZ-Clone 360° Mister is a replacement spray head for all EZ-Clone systems. These are a direct replacement for any damaged EZ Clone spray heads you might have. Great for DIY Hydroponic/Aeroponic setups. Simple to install into PVC. A lot of people simply drill a 1/8th hole and pop them in or use a 10-32 tap drill. Learn More -
Ecoplus Nylon Hose Clamps
Starting at: $7.85
EcoPlus® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together, the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black, nylon clamps won’t corrode or rust, and installation and removal requires no tools. Learn More -
Ecoplus Grommets
Starting at: $19.00
Choose from the 3 sizes of EcoPlus Grommets to fit your needs. Learn More -
Clear Tubing - 3/8"
Starting at: $11.75
Sturdy tubing for all your irrigation needs, or to make your own hydroponics systems. Learn More -
Clear Tubing - 1/4"
Starting at: $9.85
Sturdy tubing for all your irrigation needs, or to make your own hydroponics systems. Learn More -
Botanicare Ebb and Flow Fittings
Starting at: $3.35
Interior threads which accept ¾” standard pipe thread. Use as ebb and flow fittings and bulkhead fittings. Increased versatility: thread PVC pipe fittings into bulkhead fittings - ideal for use in aeroponic and drip applications. Learn More -
Hydro Flow In-line Flag Emitter Blue 2 GPH - 10 Pack
$6.75Hydro Flow™ In-Line Flag Emitters allow water to flow smoothly at the designed GPH. The flags are removable and separate easily to allow for cleaning. Works with Hydro Flow 3/16" ID Poly Tubing. Learn More -
Hydro Halo Plant Watering System
Starting at: $9.85
More effective irrigation of all types of pots/containers in all growing mediums. Drip emitters and stakes only provide a single point of irrigation making it hard for water/nutrient solution to evenly saturate a container. The water ring has 54 perfectly positioned pores to evenly irrigate containers eliminating dry pockets of growing medium. Kit contains 3 removable stakes to keep water rings in place around each plant. The water ring can also be used without the stakes if desired. The water ring has a 1 inch gap on one end to allow it to be placed around large plants without damaging the stalks. Can be used indoors or out in soil or hydroponics. Durable construction allows for years of use. Can be easily cleaned between growing cycles. Create your own flexible irrigation kits easily and cheaply with any ½ inch I.D. tubing and ½ inch fittings (not included). Please note that adding ½ inch ball valves may be necessary to create an even flow to all water rings in large installations. Learn More -
Hydro Innovations Cool Coil
$129.85A 12" stainless steel coil that is designed to be used with a water-cooled system. Chilled fresh water is pumped through the coil which should be submerged in the nutrient reservoir. The fresh water used to cool the reservoir does not mix with the water in the reservoir. Learn More -
Pepco Octa Bubbler Black 6 GPH
$11.20The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets, it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.
Learn More -
Pepco Octa Bubbler Blue 2 GPH
$11.20The Octa-Bubbler is an eight-outlet, pressure compensating, low-flow irrigation device. Along with 8 flow-controlled swivel barbed outlets, it has a 1/2” FPT inlet thread base for installation on standard risers, and a backflow prevention device for added protection.
Learn More -
Uniseals Fittings Bulkhead Connectors
Starting at: $4.10
Uniseals Fittings are used to attach pipe to just about any container in situation where bulkheads will not work. The most common use us on curved surfaces such as storage drums, buckets, and even other pipe. Uniseal acts as a Connector for Pipes. Learn More -
Top Hat Grommets
Starting at: $18.90
These grommets can be used to replace old, worn grommets in your hydroponic systems and are essential components when making a system from scratch. Learn More -
Take Apart PC Plus Emitters
Starting at: $3.95
0.5 GPH Take-apart PC Emitter - Yellow w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for heavy soil. 1 GPH Take-apart PC Emitter - Black w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for medium soil (loam). 2 GPH Take-apart PC Emitter - Blue w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for light soil (sandy). Learn More
