You have no items in your shopping cart.
Subtotal: $0.00
Hydroponics
-
EZ Clone 360 Degree Replacement Sprayer
Starting at: $2.95
The EZ-Clone 360° Mister is a replacement spray head for all EZ-Clone systems. These are a direct replacement for any damaged EZ Clone spray heads you might have. Great for DIY Hydroponic/Aeroponic setups. Simple to install into PVC. A lot of people simply drill a 1/8th hole and pop them in or use a 10-32 tap drill. Learn More -
Botanicare Ebb and Flow Fittings
Starting at: $3.35
Interior threads which accept ¾” standard pipe thread. Use as ebb and flow fittings and bulkhead fittings. Increased versatility: thread PVC pipe fittings into bulkhead fittings - ideal for use in aeroponic and drip applications. Learn More -
Figure 8 Tubing End Closers
Starting at: $3.45
Figure 8 Tubing End Closure, fits tubing O.D. up to .660" or .720" High Quality Plastic Maximum UV Protection Learn More -
Basket Drip Stake
Starting at: $3.50
Mother Nature waters from the top - so do these commercial quality drip stakes. By using these, you can run a top watering system that is virtually clog free. Top watering also has the advantage of preventing fertilizer salt build up. Learn More -
Hydro-logic QC Union Connector 1/4 in
$3.75Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
1/4" Speedfit Union Elbow
$3.90Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
Take Apart PC Plus Emitters
Starting at: $3.95
0.5 GPH Take-apart PC Emitter - Yellow w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for heavy soil. 1 GPH Take-apart PC Emitter - Black w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for medium soil (loam). 2 GPH Take-apart PC Emitter - Blue w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for light soil (sandy). Learn More -
-
Uniseals Fittings Bulkhead Connectors
Starting at: $4.10
Uniseals Fittings are used to attach pipe to just about any container in situation where bulkheads will not work. The most common use us on curved surfaces such as storage drums, buckets, and even other pipe. Uniseal acts as a Connector for Pipes. Learn More -
1/4" Speedfit Union Tee Connector
$4.30Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
Hydro-logic 2-Way Splitter 1/4 in
$4.50Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
3/8" Speedfit Union Tee Connector
$4.85Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
3/8" Speedfit Two Way Divider
$4.85Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
3/8" Speedfit Union Elbow
$5.25Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More -
Ecoplus Round Air Stones
Starting at: $5.85
Individually bagged Small - 1.25" x 1.25" x 1.75" Medium - 2" x 2" x 2" Large - 2" x 2" x 4" Learn More -
Snapture Snapstand Fittings
Starting at: $5.90
Snapture Snapstand is specially designed for strength and is literally a snap to assemble. No tools are required. The custom Snapture pieces turn standard 1” PVC pipe into tray or system stands, trellis supports, light hangers, grow tent frames and more. Learn More
