Irrigation

0.5 GPH Take-apart PC Emitter - Yellow w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for heavy soil. 1 GPH Take-apart PC Emitter - Black w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for medium soil (loam). 2 GPH Take-apart PC Emitter - Blue w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for light soil (sandy). Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Mother Nature waters from the top - so do these commercial quality drip stakes. By using these, you can run a top watering system that is virtually clog free. Top watering also has the advantage of preventing fertilizer salt build up. Learn More

Figure 8 Tubing End Closure, fits tubing O.D. up to .660" or .720" High Quality Plastic Maximum UV Protection Learn More

Interior threads which accept ¾” standard pipe thread. Use as ebb and flow fittings and bulkhead fittings. Increased versatility: thread PVC pipe fittings into bulkhead fittings - ideal for use in aeroponic and drip applications. Learn More