Air & Water Pumps

High quality chrome air manifolds. Each outlet has individually controlled valves. Learn More

Replacement filters for Danner Mag Drive pumps when they get worn out. Learn More

This pump is a magnetically driven centrifugal water pump. It has no seals to wear and contains no oil. The pump can be used submerged or inline. Inline means connections are made directly to the pump inlet and outlet ports, which have 1" NPT threads. All electrical components are encapsulated in epoxy with no seals to wear or break. The energy used is approximately 1/2 of regular motor drive pumps. The prefilter screen is provided to use in situations where deposits in the water could clog or damage the pump. This helps give uninterrupted service. Centrifugal pumps cannot pull water from a lower level. In order to start, pump must be below water level and filled with water. Unless the air can escale from the outlet, the pump will not start. No not use glues or solvents to connect the pumps threaded fittings. Use Teflon pipe tape. The pump cover is not designed to support long pipe runs or correct pipe misalignment. Pump is intended to pump water only. It cannot be used to pump oils, solvents or gasoline. Although the pump will continue to run if there is no water, after 30 minutes damage may occur if allowed to run dry. Learn More