Water Filtration

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. 3/8 in Quick Connect Inline Shut Off Valve. This is used to shut off feed or outlet line to system. This valve is for the Evolution RO1000™ and Tall Boy™ system. Learn More

A submersible pump is inserted into this filter bag to prevent sediment from clogging it. Use of the filter bag will prolong the life and reduce cleaning/maintenance of the pump. A must have for EVERY pump! Small Filter Bag works with the following pumps: Eco 66, Eco 100 and Eco 132. Large Filter Bag works with the following pumps: Eco 185, Eco 264, Eco 396, Eco 633, Mag Drive 250 & 350, Little Giant PE-1, LG 1, NK-1 and NK-2. Learn More

This is to connect 2 lengths of equal sized tubing together for the Merlin GP RO system as well as the Tall Boy system. Learn More

This is a "Y" splitter for multiple reservoirs for the Merlin GP RO system as well as the Tall Boy system. Learn More

Replaces standard Stealth RO 100 & Stealth RO 200 flow restrictors to save 50% of the drain water. Gives a 1:1 ratio. Save more water! WARNING: This product reduces waste water and can lead to a reduction in membrane life. The higher your source water's Parts Per Million (ppm) are, the shorter your membrane life will be. Not recommended if source water is above 300 Parts Per Million. USE AT YOUR OWN RISK. Learn More

This is the feed connector included with the Tall Boy. A spigot can be attached to one end and the 3/8" feed tubing, included with the Tall Boy, can be attached to the other end. Learn More

This is the feed connector included with the Tall Boy. A spigot can be attached to one end and the 3/8" feed tubing, included with the Tall Boy, can be attached to the other end. Learn More

This is a "Y" splitter for multiple reservoirs for the Merlin GP RO system as well as the Tall Boy system. Learn More

Use the Hydrologic reverse osmosis water filter Evolution-RO1000 1:1 ratio orange drain elbow 3/8" QC to customize your indoor hydroponic garden. Learn More

CL2 2.5" x 10" Micron Green Block Carbon Filter - 10 Micron Perfect use for your Stealth RO 100 / 200 and Small Boy Systems No Release of Carbon Fines Exceptionally Low Pressure Drop Manufactured from NSF Std 61 Certified Coconut Shell greencarbon Performance Validated by WQA NSF Certified for Material Safety - Standard 42 Industry Leading Performance at a Competitive Price Learn More

2-1/2" x 10" Poly Pleated Sediment Cartridge 5 Micron Filter Filtration Perfect replacement filter for Stealth RO Systems Learn More

Use the Hydrologic reverse osmosis water filter Pressure Gauge for Garden Hose spigot to customize your indoor hydroponic garden. Learn More

Keep your Hydro-Logic Stealth RO filter working in top condition a new filter! The Stealth RO system uses three types of filters; an RO membrane, a carbon filer, and a sediment filter This filter removes large and medium sized debris from your water source. It is the first filter in the system and should be replaced or rinsed regularly. It is recommended you rinse this filter every 3 to 4 and replace every 6 to 12 months with continuous use, please see your user manual for more information on filter care and replacement. Learn More

This carbon block filter is included with the Stealth RO / Small Boy and can filter out sediment, chlorine, organic, chemicals, etc. It has a capacity of approximately 3,000 gallons depending on inlet water quality. This filter contains activated carbon, a substance that has a surface area of over a football feild per gram. This filter purifies water beyond what most home filters are capable of, yet it is only a pre filter for the Stealth's advanced RO membrane. It is recommended you replace this filter every 6 to 12 months with continuous use, please see your user manual for more information on filter care and replacement. Learn More

This sediment filter is included with the Tall Boy and can filter out silt, rust, sand, etc. It has a capacity of approximately 7,500 gallons depending on inlet water quality. Learn More

This kit Power flushes Stealth-RO membrane(s) to extend life of the unit. Learn More