Water Filtration

This kit Power flushes Stealth-RO membrane(s) to extend life of the unit. Learn More

A submersible pump is inserted into this filter bag to prevent sediment from clogging it. Use of the filter bag will prolong the life and reduce cleaning/maintenance of the pump. A must have for EVERY pump! Small Filter Bag works with the following pumps: Eco 66, Eco 100 and Eco 132. Large Filter Bag works with the following pumps: Eco 185, Eco 264, Eco 396, Eco 633, Mag Drive 250 & 350, Little Giant PE-1, LG 1, NK-1 and NK-2. Learn More

This pump is designed to be installed before the Stealth-RO to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Stealth-RO to function properly. People on wells and other situations of low pressure can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth-RO to run with higher flow and efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Learn More

Produces up to 200 GPD* ultra-pure, low PPM water. Removes 98%+ of chlorine & contaminants. Wastes approximately 25% less than other RO Systems. Everything included in the box for quick hook-up. *Based on 77° F 60 psi, 550 ppm inlet water. STABILIZE pH levels & avoid mineral build-up All HIGH-QUALITY nutrients are formulated & have feed charts based on pure RO water. Crucial for EXPLOSIVE RESULTS for all hydroponics & gardening ESSENTIAL for health of beneficial micro-organisms & bio-organic growers Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. 3/8 in Quick Connect Inline Shut Off Valve. This is used to shut off feed or outlet line to system. This valve is for the Evolution RO1000™ and Tall Boy™ system. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. Learn More

Ultra Violet Sterilizer for after-Stealth RO water. Assures 100% of bacteria and viruses are sterilized. 0.5 GPM Comes with ballast and clips Learn More

This sediment filter is included with the Tall Boy and can filter out silt, rust, sand, etc. It has a capacity of approximately 7,500 gallons depending on inlet water quality. Learn More

This carbon block filter is included with the Tall Boy and can filter out sediment, chlorine, organic chemicals, etc. It has a capacity of approximately 7,500 gallons depending on inlet water quality. Learn More

Removes up to 99% of chlorine and 90% of sediment, rust, silt, etc. Filters chloramines and particulates down to 5 microns. RECOMMENDED when Merlin Garden Pro is producing more than 140 gallons of RO water per week average. ESSENTIAL for protecting Merlin Garden Pro's RO membranes by producing ultra clean feed water. EXTENDS THE LIFE of Merlin Garden Pro's pre-filter by 3 times allowing for less frequent changes (about 4,500 of RO water or 6-9 months) FAST & ECONOMICAL filter changes to assure system runs efficiently and Merlin Garden Pro is able to work better. Learn More

Ultra Violet Sterilizer for after-Stealth RO water. Assures 100% of bacteria and viruses are sterilized. 0.5 GPM Comes with ballast and clips Learn More

Use the Hydrologic reverse osmosis water filter Pressure Gauge for Garden Hose spigot to customize your indoor hydroponic garden. Learn More

Replaces standard Stealth RO 100 & Stealth RO 200 flow restrictors to save 50% of the drain water. Gives a 1:1 ratio. Save more water! WARNING: This product reduces waste water and can lead to a reduction in membrane life. The higher your source water's Parts Per Million (ppm) are, the shorter your membrane life will be. Not recommended if source water is above 300 Parts Per Million. USE AT YOUR OWN RISK. Learn More

Package Includes: Stealth RO Carbon Filter - This filter contains activated carbon, a substance that has a surface area of over a football field per gram. This filter purifies water beyond what most home filters are capable of, yet it is only a pre filter for the Stealth's advanced RO membrane. Stealth RO Sediment Filter - This filter removes large and medium sized debris from your water source. It is the first filter in the system and should be replaced or rinsed regularly. (2) Stealth RO Membrane Filter - The RO Membrane filters water down to the microscopic level, allowing nothing bigger than a water molecule through. Learn More

Package Includes: Stealth RO Carbon Filter - This filter contains activated carbon, a substance that has a surface area of over a football field per gram. This filter purifies water beyond what most home filters are capable of, yet it is only a pre filter for the Stealth's advanced RO membrane. Stealth RO Sediment Filter - This filter removes large and medium sized debris from your water source. It is the first filter in the system and should be replaced or rinsed regularly. Stealth RO Membrane Filter - The RO Membrane filters water down to the microscopic level, allowing nothing bigger than a water molecule through. Learn More

Produces up to 100 GPD (gallons per day) of ultra-pure, low PPM water. Removes 98%+ of chlorine and contaminants. Wastes approximately 25% less water than other RO Systems. Everything included in the box for quick hook-up. Customized for gardening and hydroponics. *Based on 77° F 60 psi, 550 ppm inlet water. Learn More

This is the feed connector included with the Tall Boy. A spigot can be attached to one end and the 3/8" feed tubing, included with the Tall Boy, can be attached to the other end. Learn More