Irrigation

Uniseals Fittings are used to attach pipe to just about any container in situation where bulkheads will not work. The most common use us on curved surfaces such as storage drums, buckets, and even other pipe. Uniseal acts as a Connector for Pipes. Learn More

These grommets can be used to replace old, worn grommets in your hydroponic systems and are essential components when making a system from scratch. Learn More

0.5 GPH Take-apart PC Emitter - Yellow w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for heavy soil. 1 GPH Take-apart PC Emitter - Black w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for medium soil (loam). 2 GPH Take-apart PC Emitter - Blue w/ Outlet Nipple - 1/4" Barb Inlet Outlet can be used with .128 x 0.76 or .250 x .160 PE Tubing "Turbulent flow" PC (pressure compensating) drippers maintain their rated flow rate for 10-60 psi inlet pressure. These drippers can be used at the end of 1/4" tubing feeders or can be inserted directly into 1/2" hose. Ideal for light soil (sandy). Learn More

Use to connect 3/4" tubing to 1/2" tubing. Learn More

Use to connect 1" tubing to 3/4" tubing. Learn More

4" Support Stakes Use to hold drippers in position next to plants to be watered. Position a support stake in the soil halfway between the center and the outer edge of the container. Place the dripper end securely in the yoke of the stake, allowing approximately 1" overlay. Adjust the depth of the stake leaving a minimum 1" air gap between the dripper outlet and the overflow rim of the container. 6" Support Stakes Use with 1/4" Tubing Use to hold tubing with drippers or tubing ends of the Hydroport Watering Manifold, Drip Star, Multiplex and Four Outlet Bubblers. Learn More

The professional tubing cutter has a hardened stainless steel blade that is designed to cut all flexible plastic hose/tubing up to 1.5" outside diameter. Designed for comfortable use. punch holes in 1/2", 5/8" or .710" hose to insert PC drippers or 1/4" fittings. Learn More