EZ Clone Classic Cutting System

The new EZ-CLONE Classic is a dramatically improved and updated version of the EZ-CLONE Original, which has been a staple of Aeroponic Cloning in the Hydroponic Industry for over a decade. This beautiful system is manufactured from 100% recycled materials and has been engineered and perfectly thought out to bring you the same amazing results as the Original.

• New overall and stylized design
• Customized manifolds specially designed for each sized system
• Easier to assemble

Over 75 technical, structural and aesthetic upgrades

Lid - Material changed from ABS to HDPE (High-density polyethylene)

1) Is an environmentally friendly alternative to other materials.
2) Can be recycled many times
3) Has low heat conductivity
4) Resistant to Ultra Violet (UV) light
5) Is expandable and elastic, HDPE can be shaped and bent without affecting its properties
6) Does not conduct electricity
7) Is water proof and an excellent sealing material
8) Can resist the corrosiveness of alkalis and acids
9) Can withstand knocks and tension
10) FDA, NSF and USDA approved for direct contact for any food related products.

Molding process

11) New molding process is more environmentally sound and requires less energy.

Hand recesses

12) New stylized hand recess in the lid allow for improved grip when lifting your lid to check on your roots.
13) New hand recess are ascetically pleasing and stylized to compliment any grow room.

Cloning collar cup depth

15) To insure a snug fit for our cloning collars we decrease our cloning collar cup diameter.
16) By reducing our cloning collar cup diameter and having a more snug fit we are increasing the support your cuttings have.

Dual finger recesses 

17) By adding another finger recess to each cloning collar cup removal of cuttings had never been easier.

Additional cloning sites

18) Increasing the number of cloning sites allows for more cuttings for a better price.

No cord outlets 

19) By removing all cord outlets from the lid drastically reduces leak points.
20) No cord outlets in the lid creates a completely reversible lid.

Smoother edges interior 

21)Due to the new manufacturing process there a no hard edges in the lid which assist with ease of cleaning.

Structural groves

22)By adding structural groves the lid is more reinforced making it more durable and indestructible.

Smoother texture

23) New smooth texture lends itself to better cleaning in between cycles.

Dual Logo badge

24) Dual logo’s means your friends will be able identify you use an EZ-CLONE easier, making you the coolest grower!

Dimension

25) The new lid dimension is a smaller foot print with more cuttings. This means you can get more roots for your real-estate.
26) Improved lid depth allows for better root development.
27) New wider opening allow for larger root masses to be propagated and removed with little to no damage.
28) New ultra efficient shape allows for less floor space and more cuttings.

Reservoir - Material changed from ABS to HDPE (High-density polyethylene)

29) Is an environmentally friendly alternative to other materials.
30) Can be recycled many times
31) Has low heat conductivity
32) Resistant to Ultra Violet (UV) light
33) Is expandable and elastic, HDPE can be shaped and bent without affecting its properties
34) Does not conduct electricity
35) Is water proof and an excellent sealing material
36) Can resist the corrosiveness of alkalis and acids
37) Can withstand knocks and tension
38) FDA, NSF and USDA approved for direct contact for any food related products.

Molding process

39) New molding process is more environmentally sound and requires less energy.

Smoother texture

40) New smooth texture lends itself to better cleaning in between cycles.

Handle placement

41) Improved side handle placement allow a more natural position when transporting your system.

Ergonomic handle undercut

42) The new ergonomic undercut for the handle reduces finger strain when transporting your system.
43) Allows for a better strong grip so you can confidently transport your system.
44) Reduces forearm tension which keeps you cloning hand strong.

Dimension

45) New ultra efficient shape allows for less floor space and more cuttings.
46) The new reservoir dimension is a smaller foot print with more cuttings. This means you can get more roots for your real-estate.

Cord outlet

47) Facetted cord outlet is ultra stylized to compliment the design of your new EZ-CLONE Classic.
48) Is oversized to allow multiple cords or lines to be run into your reservoir.
49) Unibody design means no misplacing any secondary part needed to insure a leak proof seal.
50) Proved a leak proof seal with solid lid interface.

Drain plug location

51) New side location allows for better draining.
52) The side angles of the reservoir allow for a full tip with limited slip.
53) The drain plug is completely recessed allowing a constant drain when tipping.
54) Fully recessed means no more knocking or kicking your drain plug. so it cannot be kicked
55) By concealing the drain plug the overall look of your system is cleaner

Structural groves

56) By adding structural groves the reservoir is more reinforced making it more durable and indestructible.
Less edges and smoother interior 
57) Due to the new manufacturing process there a no hard edges in the reservoir which assist with ease of cleaning.

Curved lip where lid interfaces

58) With a more predominant curved edge on the reservoir no stagnant water will build up.
59) No stagnant water means no algae growth.

Dual Icon badge

60) Dual icon’s means your friends will be able identify you use an EZ-CLONE easier, making you the coolest grower!

Date stamped

61) Date stamped plastic makes it easier to know when its time to purchase a new EZ-CLONE.

Manifold Dimensions

62) Precise dimensions to provide the best spray coverage possible.

Mister placement

63) New mister placement to provide the best coverage possible.

Mister amount

64) Less is more. Few misters provide a more plant friendly environment to allow for better root development.

Individual manifolds for all units

65) Customized manifolds for each size unit. These new manifolds have been specifically designed and pared with each size of the unit.

Texture 

66) New smooth texture lends itself to better cleaning in between cycles.

Reenforced adapter threading

67) Reenforced adaptor threading means less cracking when overtightened.

Ultrasonically welded

68) Manifolds are ultrasonically weld producing the strongest bond possible to protect against splitting.

New Mag 450

69) New Mag 450 is a perfect match for our smaller units.

70) Plastic coated impeller reduces friction and increases pump life.

Mister Pre-bagged 

71) Pre-bagged with an extra mister.

Cloning Collars

72) New 17 cloning collar size to accompany the 16 system.
73) Hard material has been reintroduced into EZ-CLONE’s product line to allow the customer more options.

Over all System - Less time to assemble 

74) Less misters to screw in.
75) No air pump or air lines to mess with.

Lower energy consumption

76) Less pumps means less energy usage which will reduce your energy bill.

Updated and simplified instructions

77) New updated and simplified instructions allow for easier assembly and maintenance of one’s system.

Insert kit secured to the lid

78) Insert kit is now firmly attached to the lid to minimize damage during shipping.